Diamond 8 Vertical Edge Polisher
Download Data Sheet

Diamond 8 Vertical Edge Polisher

New in 2020, BridgeSaw.com, powered by Machine Tech Enterprises, is introducing the new Diamond 8 Vertical Edge Polisher.

Unique Features:

  • Offset Motors – Diamond 8 was designed
    so the motors are out of the way of water,
    extending the life of motors and working
    components.
  • With its simple design, the Diamond 8,
    can be rapidly installed and started. It can
    be floor-anchored and does not require
    any foundations.
  • Touch screen controls along with simple
    manual adjustments makes for easy use
    and training.

Call Us Today! 877.262.1500

Diamond 8 Vertical Edge Polisher Specifications

FEATURES

We don’t believe in charging for upgrades so we include all of the following & more on this amazing machine.

  • Vertical edge polisher for polishing materials up to 60 mm thick
  • Equipped with an additional spindle which performs many profile shapes
  • Simple design – the Diamond 8 can be rapidly installed and started
  • It can be floor-anchored and does not require any foundations
  • Spindle performs the edge profile-shaping, or the thickness gauging, or the “drip board” carving
  • Polishing spindle unit is designed with oscillating motion in order to guarantee the maximum polishing degree
  • Polishing and chamfering spindles with pneumatic pressure, equipped with labyrinth frontal and protection bellows
  • Touch screen control to perform polishing even in a non-continuous manner
  • Great stability of the vertical piece thanks to the rigidity of the seat-guides and conveyor belt
  • Simple manual adjustment of the lateral pressure bar according to the thickness of the piece to be worked
Diamond 8 Vertical Edge Polisher

TECHNICAL DATA 

  • Minimum working thickness – .4” (1 cm)
  • Maximum working thickness – 2.5” (6 cm)
  • Number of edge spindles – n° 6
  • Number of upper shaping spindles – n° 1
  • Number of lower shaping spindles – n° 1
  • Abrasives wheels diameter – 5” (130 mm)
  • Number of spindles for profile cutting – n° 1
  • Motor power for profile cutting – Kw 4
  • Disc diameter for profile – 10” (250 mm)
  • Diameter of tool for bull-nose – 10” (250 mm)
  • Total power – 60 Amps total (16Kw)
  • Belt speed – 4-100 inches per minute
  • Net weight – 4,000 lbs.

OVERALL DIMENSIONS

  • LENGTH – 180” (4540 mm)
  • WIDTH – 46” (1150 mm)
  • HEIGHT – 54” (1350 mm)

Diamond 8 Vertical Edge Polisher